When you are purchasing a house to flip it and earn a return on your investment, you need to do a few things before sealing the deal. One of the first things that you need to do is make sure that the property has no structural problems, especially if you are on a tight budget. Sometimes structural problems can be fixed fairly easily and buildings brought up to code by simply adding an extra support beam to a ceiling, but this is usually not the case.
One of the worst problems that you can run across when you are playing the house flipping game is mold growth anywhere in the house. Have the home tested for mold or moisture issues before you purchase it and if these problems arise, ask yourself just how much of your budget can you allocate to getting rid of this problem. You may want to pass if the mold remediation will take too big of a chunk out of your budget and move onto the next property. A number of factors will determine if the problem is worth it.
What is the house worth and how much do you expect to earn when you sell it? A $550,000 house you purchased for $400,000 with a $5,000 mold problem is not such a bad thing, but if it is all over the house and you have to tear down all the walls and replace them, you may be looking at much more work than will be worth it in the end.
Is the mold growth isolated to one part of the house? Is it dead? If the mold is dead and you can remove the affected drywall or wood fairly easily, it might be worth it. You need to look around for water damage in the molded area, though, and determine if there is still a water damage issue that needs to be repaired. The most important thing is to make sure that there are no plumbing leaks in the house.
Know what you are getting yourself into when you make the decision to purchase a home contaminated with mold. If it is only in one room and there do not appear to be any expensive water damage issues to deal with, it might be worth it. If you think you will make significantly more than the remediation will cost you, go for it. But, if the mold is all over the house and you’re on a budget, stay away.
Jim Corkern is a writer and promoter of quality
Los Angeles water damage and restoration services and Denver water damage restoration companies.
Friday, September 28, 2007
Taking Care of Mold in Your Kitchen
The kitchen is often the heart of the household and since we have to eat to survive, this is one of the most important rooms in your home to keep clean. This means not only the countertops, dishes, and table where we eat, but also the inside of the refrigerator where we keep our food. We should pay special attention to what we take into our bodies, since foods that have become contaminated can make the strongest of us deathly ill.
So, just exactly what foods do we need to throw away? Well, not all foods that are outdated need to be thrown out. Most of the time the expiration date refers to the date that the grocery store has to sell the item by, not necessarily the date that it needs to be consumed by. Many items will remain safe to eat for months after their expiration dates, as long as the seal on them has not been broken. Once the seal has been broken, though, these items will go bad just like anything else.
Once an item has had its seal broken, it is exposed to mold spores, bacteria, viruses, and other hazards in the household. Keeping the inside of your refrigerator cleaned out can help reduce this, but the threat will always be there. Almost anything that you find in the refrigerator that has become molded needs to be thrown away, but a couple of things are fine as long as you cut off the molded parts and a generous portion around them. This includes dense items that do not contain a high moisture content, like hard salami and blocks of cheese. Items that have a lot of moisture, like jams, jellies, sour cream, mayonnaise, and etcetera cannot be saved. Do not consume these items under any circumstances.
Fruits and vegetables that become molded usually need to be thrown away, as well. Keep a check on your produce supply to make sure that one bad item does not contaminate the rest. Mold spreads fairly quickly over these and it needs to remain monitored or you will have wasted a good sum of money on fresh produce for nothing. Never buy more than you will consume within the next few days.
Cleaning out your refrigerator at least once every few months is advised to keep bacteria from building up inside it. This can be a chore that your kids can do, but only if you show them how to do is properly first. If not done correctly, it might as well not have been done at all.
Jim Corkern is a writer and promoter of quality
Water Damage Restoration Contractors and
Miami water Damage companies.
So, just exactly what foods do we need to throw away? Well, not all foods that are outdated need to be thrown out. Most of the time the expiration date refers to the date that the grocery store has to sell the item by, not necessarily the date that it needs to be consumed by. Many items will remain safe to eat for months after their expiration dates, as long as the seal on them has not been broken. Once the seal has been broken, though, these items will go bad just like anything else.
Once an item has had its seal broken, it is exposed to mold spores, bacteria, viruses, and other hazards in the household. Keeping the inside of your refrigerator cleaned out can help reduce this, but the threat will always be there. Almost anything that you find in the refrigerator that has become molded needs to be thrown away, but a couple of things are fine as long as you cut off the molded parts and a generous portion around them. This includes dense items that do not contain a high moisture content, like hard salami and blocks of cheese. Items that have a lot of moisture, like jams, jellies, sour cream, mayonnaise, and etcetera cannot be saved. Do not consume these items under any circumstances.
Fruits and vegetables that become molded usually need to be thrown away, as well. Keep a check on your produce supply to make sure that one bad item does not contaminate the rest. Mold spreads fairly quickly over these and it needs to remain monitored or you will have wasted a good sum of money on fresh produce for nothing. Never buy more than you will consume within the next few days.
Cleaning out your refrigerator at least once every few months is advised to keep bacteria from building up inside it. This can be a chore that your kids can do, but only if you show them how to do is properly first. If not done correctly, it might as well not have been done at all.
Jim Corkern is a writer and promoter of quality
Water Damage Restoration Contractors and
Miami water Damage companies.
Plumbing and Mold Issues for New Home Builders
When you are having a contractor build your home, there are a few things that you need to do before they begin the project.
The first thing on the list is to find a contractor that you think that you can trust. Finding one through the phone book is not an entirely bad idea, but asking around can be more beneficial. You can use the phone book to do this or ask friends for the name of a good contractor, you will still want to get at least three different contractors on a list of those that you are considering. Make sure they all three get the same set of building plans so they are all bidding on the same project.
When looking at the bids that you have received, be wary of a bid that is significantly lower than the others. This may be a sign of inexperience or desperation. While desperation is not necessarily a bad thing, inexperience is your enemy and you need to avoid hiring an inexperienced contractor. Consider the lowest offer, but do a good amount of research on the contractor first. Get more references from him than for the higher offers to ensure that he is experienced and will do a good job.
No matter which contractor that you choose from your list, you need to visit the job site as often as possible to ensure that your new home is being built correctly and is completely up to your local building codes. Building codes vary from state to state and even city to city, so be aware that a building inspector may come by to make sure it is done correctly. You should also pay good attention to how your contractor is taking care of your building materials. Nothing should ever be stored on the ground, especially wood and drywall. These will mold fairly quickly and the last thing you want is mold built into your brand new home. For best results, have a mold inspector come out to look at the property a few times before the project is completed.
Having an experienced plumber on the job is also very necessary. Bad plumbing in your home can cause water damage that is often very expensive to repair and you never know when a leak will spring up. If a building inspector has not come out to check the property, make sure he or she does to inspect this.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
The first thing on the list is to find a contractor that you think that you can trust. Finding one through the phone book is not an entirely bad idea, but asking around can be more beneficial. You can use the phone book to do this or ask friends for the name of a good contractor, you will still want to get at least three different contractors on a list of those that you are considering. Make sure they all three get the same set of building plans so they are all bidding on the same project.
When looking at the bids that you have received, be wary of a bid that is significantly lower than the others. This may be a sign of inexperience or desperation. While desperation is not necessarily a bad thing, inexperience is your enemy and you need to avoid hiring an inexperienced contractor. Consider the lowest offer, but do a good amount of research on the contractor first. Get more references from him than for the higher offers to ensure that he is experienced and will do a good job.
No matter which contractor that you choose from your list, you need to visit the job site as often as possible to ensure that your new home is being built correctly and is completely up to your local building codes. Building codes vary from state to state and even city to city, so be aware that a building inspector may come by to make sure it is done correctly. You should also pay good attention to how your contractor is taking care of your building materials. Nothing should ever be stored on the ground, especially wood and drywall. These will mold fairly quickly and the last thing you want is mold built into your brand new home. For best results, have a mold inspector come out to look at the property a few times before the project is completed.
Having an experienced plumber on the job is also very necessary. Bad plumbing in your home can cause water damage that is often very expensive to repair and you never know when a leak will spring up. If a building inspector has not come out to check the property, make sure he or she does to inspect this.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
Subscribe to:
Posts (Atom)
